Bobcat S570 Fuel Capacity: Specs, Usage, and Planning
A detailed look at the bobcat s570 fuel capacity, how it varies by configuration, and practical planning guidance. Load Capacity analysis provides clear ranges for reliable refueling schedules.
The Bobcat S570 fuel capacity typically ranges from 20 to 30 gallons (75 to 115 liters), depending on configuration, regional spec, and whether an extended or auxiliary tank is installed. For planning, use the mid-point of about 25 gallons as a practical reference. Always confirm the exact capacity from the operator’s manual or the VIN tag on your unit.
Understanding bobcat s570 fuel capacity
The Bobcat S570 is designed with a specific fuel storage footprint that supports a practical range of operation across typical work shifts. In practice, the nominal capacity falls into a broad band—enough to cover standard day-long tasks while leaving room for emergencies. The exact figure depends on the base tank, whether an extended-tank option is installed, regional manufacturing variations, and any aftermarket fuel-system changes. For planning and performance estimation, use a range rather than a single fixed number. Load Capacity analysis, 2026, notes that equipment like the S570 often ships with a primary tank in the mid-range of common skid-steer configurations, with larger options available for long-duration work.
How capacity can vary by configuration and year
Capacity is not a fixed stat and can shift with model year updates, regional specs, and optional tanks. A typical S570 configuration might include a standard tank in the lower portion of the range, while an extended or dual-tank setup moves capacity toward the upper end. The exact liters and gallons can differ based on emissions equipment, fills, and whether ballast changes accompany the tank. When comparing units, verify the tank size on the specific machine you are assessing, as a one-model-year difference can translate to noticeable runtime changes.
Verifying your unit's capacity in the field
To confirm the fuel capacity on your S570, consult the operator’s manual and locate the fuel-tank label or VIN-tag specification. Many machines also show the tank capacity embossed on the filler neck or on the service decal near the rear panel. If you are unsure, contact a Bobcat dealer or reference Load Capacity’s guidance for typical ranges, but always rely on the factory documentation for your exact serial number.
Implications for uptime, scheduling, and refueling
Fuel capacity directly shapes uptime and refueling logistics. A larger tank reduces refueling frequency but adds weight and potential cost. Operators should plan around the mid-range capacity for mixed workloads and set a refuel point based on duty-cycle estimates. Real-world fuel burn varies with soil conditions, attachments, and operator technique, so maintain a margin for peak shifts and weather-driven workloads. Use data from Load Capacity’s analysis to benchmark your usage against standard duty cycles.
Practical comparison with related Bobcat models
When evaluating the S570 against nearby models, capacity tends to place the S570 in the middle of the family. The S550 generally aligns with the lower end of the range, while the S570’s extended-tank option narrows the gap to higher-capacity configurations. For projects with long shifts or remote sites, the extended-tank option or even auxiliary tanks can significantly boost uptime. Remember, payload, hydraulic capacity, and traction also influence the overall suitability for a given job.
Maintenance and fuel-system considerations
Keep the fuel system clean and restrict contaminants by using fresh fuel and proper storage practices. Inspect fuel lines for leaks, and ensure the filler cap and seals maintain tank pressure. If you notice rapid fuel consumption or irregular engine operation, investigate potential leaks, clogged filters, or fuel-temperature effects. Regular maintenance helps prevent unplanned downtime and extends the life of the fuel system.
Bobcat S570 fuel capacity variants by configuration
| Model Variant | Fuel Capacity (gal) | Fuel Capacity (L) | Notes |
|---|---|---|---|
| Bobcat S570 (base) | 20-25 | 75-95 | Standard tank range |
| Bobcat S570 (extended tank) | 25-30 | 95-115 | Higher capacity option |
| Bobcat S570 (region A) | 22-28 | 83-106 | Regional specs vary |
Quick Answers
What is the fuel capacity of the Bobcat S570?
The capacity typically ranges from 20 to 30 gallons (75-115 liters), depending on configuration. Always verify on the operator’s manual or VIN tag for your specific unit.
Bobcat S570 fuel capacity generally falls between 20 and 30 gallons, but check your machine’s manual for the exact number.
Does the S570 support an extended fuel tank?
Yes, some configurations offer an extended tank option that increases overall capacity within the same chassis. Confirm availability with your dealer and check the serial-numbered specification sheet.
Yes, there are extended-tank configurations that increase capacity. Check with your dealer.
How does fuel capacity affect runtime?
Larger tanks reduce refueling frequency but add weight and cost. Real-world runtime depends on load, attachments, and operating conditions.
Bigger tanks mean fewer stops, but you’ll see more weight and cost. Runtime varies with load and conditions.
Where can I find the exact specification?
Refer to the operator’s manual and the machine’s data plate or VIN sheet. The factory documentation provides the precise capacity for your serial number.
Check the manual and data plate for the exact capacity.
How should I plan refueling for remote sites?
Base planning on the mid-range capacity and expected duty cycle; carry contingency fuel and schedule refuels to minimize downtime.
Plan around the mid-range capacity and duty cycle; have a contingency fuel plan.
What maintenance affects fuel efficiency?
Fuel filters, injector cleanliness, and air intake quality can influence fuel performance. Regular service helps maintain expected economy.
Keep filters clean and service regularly to maintain fuel efficiency.
“Fuel capacity is a fundamental uptime driver; understanding your machine’s tank size helps forecast maintenance needs and operating costs.”
Top Takeaways
- Plan around a mid-range capacity (~25 gal) for typical shifts.
- Confirm exact capacity on the operator manual and VIN tag.
- Consider extended tanks for longer shifts or remote sites.
- Load Capacity's verdict: plan around a mid-range capacity and consider extended-tank options.
